Welcome to ZMS Cable Email: info@zmscable.com Tel: +86 371-67829-333

0.6/1kV overhead aerial bundled cable

Aerial Bundle Cable (ABC cable) is a very innovative concept for overhead power distribution as compared to the conventional bare conductor overhead cable.

 0.6/1kV  XLPE insulated triplex abc overhead cable

Product Description

1. 0.6/1 kV Overhead Cable

2. Aluminum conductor

3. XLPE /PE Insulation

4. Phase conductor+ neutral Conductor

5. IEC ICEA NFC Standard

LV Aerial Bundled Conductor (ABC) Cables

Application of tripelx abc cable

Aerial Bundle Cable (ABC cable) is a very innovative concept for overhead powerdistribution as compared to the conventional bare conductor overhead cable.

property system.

Electrical Properties

rated Voltage0.6/1kV
Test Voltage4VeffkV
minimum laying Temperature-20°C
operating Temperature-40°C~ +90°C
maximum Short-circuit Temperature250°C
maximum Conductor Temperature80°C
minimum Bending radius18×OD

It provides higher level of safety and reliability, lower power losses and ultimate system economy by reducing installation, maintenance and operative cost.

LV Aerial Bundle Cables are designed to supply 600/1000 volt aerial service for temporary service at construction sites, as a service drop (power pole to service entrance),as a secondary cable (pole to pole) or street lighting. 

This over-head cable providesreinforced insulation acc. IEC 61140 and fulfill therefore Class II acc. IEC 61140. 

It is not flame retardant. But this could be if requested change to a flame retardant cable.

Standard of tripelx abc cable

Basic design to BS 7870 / TNB Specification(IEC 60502) / HD 626 S1 / NFC 33-209 / AS/NZS 3560-1 standards

Construction of tripelx abc cable

Conductor: Aluminium conductor, round stranded compressed (RM).

insulation: XPLE compound, UV-resistant.

Core identification: 1, 2 resp. 3 raised longitudinal ribs on the surface of the cores. 

The surface of the neutral core should have at least 12 ribs for cross-sections up to 50 mm²

and a minimum of 16 ribs for cores above 50 mm². In the case of five core bundles the

surface of the protective core should be smooth.

Construction Parameters of tripelx abc cable TNB Specification (IEC 60502)

number of cores xNominal cross Sectionoverall diameterweightMaxinum conductor ResistanceMinimun breaking Loadcurrent Rating

1x16+1x25 RM15.31601,9102,572
3x16+1x25 RM192901,2004,0107
3x25+1x25 RM23.24000,8685,5132
3x35+1x25 RM25.65000,6418,0165
3x50+1x35 RM306800,44310,7205
3x70+1x50 RM34.99200,32013,7240
3x95+1x70 RM40.612700,25318,6290
3x120+1x70 RM44.115100,20623,2334
3x150+1x95 RM49.218700,16428,7389
3x185+1x120 RM54.923400,12537,2467
3x25+1x25+1x16 RM23.24701,9102,572
3x35+1x25+1x16 RM25.65601,2004,0107
3x50+1x35+1x16 RM307400,8685,5132
3x70+1x50+1x16 RM34.99800,6418,0165
3x95+1x70+1x16 RM40.613300,44310,7205
3x120+1x70+1x16 RM44.115800,32013,7240
3x150+1x95+1x16 RM49.219400,20623,2334
3x185+1x120+1x16 RM54.924101,9102,572
Next: ... Prev: