ABC Overhead Cable

aluminum conductor XLPE insulated aerial bundled abc overhead cable, Aerial Bundled Conductor (ABC) Cables.

ZMS Cable comany mainly provides complete supply services for distributors and suppliers all over the world.

Consulting services, purchasing services, transportation services, and after-sales services are included.

We mainly provide complete supply services of ABC Overhead Cable for distributors and suppliers all over the world.

Application of ABC Overhead Cable:

Aerial bundled cables are mainly used for secondary overhead lines on poles or as feeders to residential premises.

The cable as a new-type aerial cable is used for transmitting electric power overhead, extensively used in rebuilding urban and forest region electrified wire netting.

It improves the safety and reliance on electrified wire netting.


Basic design to IEC 60502 / AS / NZS 3599-1 standards

Construction of ABC Overhead Cable:

Phase Conductor: Circular compacted stranded H68 aluminum to BS2627.

ABC aluminum and screen: Extruded semi-conductive layer.

Insulation: XLPE.

Insulation Screen: Extruded semi-conductive layer.

Metallic Screen(optional): Copper wire screen or copper tape screen.

Separator: Semi-conductive swellable tape.

Outer Sheath: HDPE.

Support Conductor: Galvanized steel wires.

Assembly: Three XLPE insulated screened cores are bundled around the galvanized steel wires in a right-hand lay.

Characteristics of Aerial Bundled Cables

  1. The rated voltage of the air bundle cable is 0.6/1KV, 10KV, and 35KV respectively.2. 

  2. The cable laying temperature should be no less than -20℃. Not more than 5S in short-circuit operation.

  3. Cable high temperature: cross-linked polyethylene insulation 250℃, high-density polyethylene SK insulation 150℃, PVC insulation 160℃.

  4. Cable conductor long-term allowable working temperature: PVC insulation should not exceed 70℃, polyethylene should not exceed 70℃, and cross-linked polyethylene insulation should not exceed 90℃.

  5. Cable bending radius: single-core should be not less than 15 times the outer diameter of the cable, and multi-core should be not less than 10 times the outer diameter of the cable.

Advantages of the Aerial Bundled Cable Produced by ZMS

  1. High reliability of the power supply system and the choice of overhead cable can greatly reduce the common failures of various short-circuit faults (especially the common short-circuit faults of bare transmission lines).

    It is compared with the body of the bare transmission line, the equipment failure rate is 4-6 times lower.

  2. A good safety factor of the power supply system, the choice of overhead cable makes personal safety electrocution accident safety accidents significantly reduced.

    When the overhead cable is connected to the power supply, when the human body or other small animals accidentally touch the surface of the insulation layer of the cable line, if the cable line is not struck through, it is not easy to cause adverse effects on people and animals.

  3. Our overhead bundled cables are easy to build and service and the overhead cables can be built on various types of tower poles.

    It can also be erected along the wall, and in special cases, it can be shuttled through the woods and immediately fixed to the main pole with gold fixtures without moving.

  4. Reasonable and effective, although the choice of overhead cable is more expensive than the choice of bare transmission lines overhead in price but cheaper than the general underground installation of cable lines.

    Therefore, its comprehensive engineering cost is lower, and economic development is faster and more effective.

Service of ZMS Company

Overproduction Services

ZMS ABC cable aerial electrical fittings suppliers have a wide range of cable and conductor products for you to choose from. We will provide attentive service and professional project solutions to everyone who needs them.

Quality Certification Service

ZMS cable products are manufactured in accordance with international standards such as GB, IEC, BS, NFC, ASTM, DIN, etc. Our technical team can customize the cable products to meet your requirements.

Delivery and Shipping Services

While we at ZMS provide high-quality cables, we also offer good delivery solutions. While ensuring the safe delivery of our products, we offer the best packaging and shipping solutions to greatly reduce our customers' shipping costs.

ZMS Packaging

The packaging of ZMS cables is provided in wooden rolls, corrugated cartons, and reels. The cable ends are sealed with BOPP self-adhesive tape and non-hygroscopic sealing caps to protect the cable ends from moisture. 

We can print the required markings on the outside of the drums with waterproof material according to the customer's requirements.

IEC 60502 19/33 kV 11kv ABC cable specification

NO.Cores X Cross SectionPhase ConductorMessenger Suspension Unit
StrandingNominal Sectional AreaNominal Sectional AreaBreaking Load
3X50 + 1X5019/1.78507/3.05060
3X150+ 1X5019/.141507/3.05060
3X70 +1X5037/2.5277/3.155062
3X150 +1X5037/2.251507/3.155062

Concentric strand aluminum wires as phase conductor; AAAC(all aluminum alloy conductors) or ACSR (aluminum conductor steel reinforced) as a messenger (Neutral) core; Phase conductor is insulated by XLPE or HDPE or PVC

Overhead Cable

There is no news related to this product.


ZMS Cable have a wide product scope, includes: Power cables up to 500kV, AAC, AAAC, ACSR conductors, ABC Cable,electric wires, instrument cable, telecommunications cable, Stay wires. With advanced manufacture technology, rich human resource and effective management system, we guarantee all products are manufactured strictly in accordance with GB, IEC, BS, NFC, ASTM, DIN standards,etc. Beyond quality control, ZMS have been trying its best to offer much higher standard of services rather than expected.

The Adjuster
All customised cables designed by our cable engineer will be subject to testing to relevant standards and appropriate performance criteria. Bespoke cable testing will be conducted under our CNAS accreditation where appropriate. Where required by industry or application, we can submit for relevant cable certification and cable approval processes. For more information or to discuss possible custom designed cable solutions, please complete an enquiry form, contact our technical experts on the Technical Hotline +86 (0)371 6782 9333, or

The Zms Cable Advantage

You can contact us in the following ways:

email to OR click Inquiry