Fiber Optic Cable Multi Cord is the presence of multiple cores in a common cladding area.

Due to the proximity of the cores to each other, two functions are possible.

What is multicore fiber?
Let's start with the structure of a common single-core fiber.

The cross-section of a normal single-core fiber is composed of a core, a cladding, and a coating layer from the inside to the outside, cladding and coating layer.
The core and cladding are made of glass with different refractive indices, and the cladding is an elastic coating that is cured with UV light to protect the fiber while it is being pulled from the preform.

The diameter of ordinary hair is about 60um to 90um, and although the cladding diameter of a single-core fiber power cable is similar to that of ordinary hair, it is still too large relative to the diameter of the mode field.
So there is the production method of putting more fiber cores in the cladding, for example, 7 cores in the cladding.
One is a structure with large core spacing, i.e., no optical coupling. 

This type of fiber is due to the ability to increase the integrated density per unit area of the transmission line.
In multicore fiber optic communication, it can be made into a ribbon cable with multiple cores, and in the non-communication field, as a fiber optic transmission bundle, there are made into thousands of cores.
The second is to make the distance between the cores close to each other, which can produce a light-wave coupling effect.
This principle is being used to develop a dual-core sensitive or optical circuit device.

Applications:

A Fiber Optic Cable or multicore fiber cable is a flexible, transparent fiber made by drawing glass (silica) or plastic to a diameter slightly thicker than that of a human hair.

The flexible optical cable is used most often as a means to transmit light between the two ends of the fiber and finds wide usage in fiber-optic communications, where they permit transmission over longer distances and at higher bandwidths (data rates) than wire cables.

Fibers are used instead of metal wires because signals travel along them with less loss; in addition, fibers are immune to electromagnetic interference, a problem from which metal wires suffer excessively.

Fibers are also used for illumination and imaging and are often wrapped in bundles so that they may be used to carry light into, or images out of confined spaces, as in the case of a fiberscope.

Specially designed fibers are also used for a variety of other applications, some of them being fiber optic sensors and fiber lasers.

ZMS Power Cable Group provides you with the best fiber optic cable solution.

Fiber optic cords use：

Gigabit Ethernet, active device termination, telecommunication networks, video, multimedia, premise installations, local area networks, FTTH FTTX applications, CATV.

Types of Fiber Optic Cable Multi Cord:

ADSS Fiber Optic Cable

OPGW Fiber Optic (Optical Power Ground Wire)

Standard of Fiber Optic Cable：

IEC 60793; ITU G651.1; ITU G652-G657;

Structure:

1. Type: single mode/multiple modes

2. Multi Core: 2-144 fibers

3. Loose Tube: FRP

4. Central strength member: FRP

5. Filling: Jelly compound

6. Wrapping: water-blocking tape

7. Sheath: PE

Provided by ZMS Power Cable Group

Parameter of Fiber Optic Cable Multi Cord: