+86 371-67829-333

6/10 kV Cu(AL) / XLPE / SWA(STA) / PVC Power Cable(3 & 1 core(s) AWA)

6/10KV AL/CU Conductor XLPE insulated SWA(STA) Armoured PVC sheathed Power Cable
6/10 kV Cu(AL) / XLPE / SWA(STA) / PVC Power Cable(3 & 1 core(s) AWA)

6/10 kV Cu(AL)/XLPE /SWA(STA)/PVC Power Cable(3 CORE) AND 6/10 Cu(AL)/XLPE /AWA(ATA)(1 CORE )/PVC Power Cable

Cross linked XLPE insulation electric power cable not only has excellent electric and mechanical properties,but also has powerful resistance against chemical corrosion, heat aging and environmental stress.

Crosslinked 6/10kv xlpe power cable

Its structure is simple and can be used conveniently and also can belaid with no restriction of different levels.

The long term operating temperature is 900C, and its transmission capacitanceis large.

Our company can produce both flame retardant and nonflame retardant series of XLPE power cable Our products can be produced according to our works specifications which are equivalent to GB12706, IEC60502, IEC60332, IEC60754, and its some indexes are superior to standards as stated above.



Power cables for power networks, underground and in cable ducting.


AL/XLPE/STA/PVC Armoured Electrical Cable

    Round bare aluminum conductor stranded according to IEC 60228

    Inner semi-conductive layer

    Core insulation XLPE

    Color code according to HD 308 S2

    Outer semi-conductive layer

    Semi-conductive tape

    Copper tape screen


    PVC inner sheath

    Galvanized steel tape armour (STA)

    PVC outer sheath (red or black)

Technical data:

Rated Voltage (Uo/U)(Um)6/10KV
Temperature RatingFixed: 0°C to +90°C
ConductorClass 2 Stranded Copper or Aluminum Conductors for Single Core and three-Core Cables
Conductor ScreenSemi-conductive XLPE (Cross-Linked Polyethylene)
Metallic ScreenIndividual or collective overall copper tape screen according to BS 6622
InsulationXLPE (Cross-Linked Polyethylene)
Insulation ScreenSemi-conductive XLPE (Cross-Linked Polyethylene)
Minimum Bending RadiusSingle core - Fixed: 15 x overall diameter
3 core - Fixed: 12 x overall diameter
ArmourSingle core: AWA (Aluminium Wire Armoured)
Multi-core: SWA (Steel Wire Armoured)
SheathPVC (Polyvinyl Chloride) Type TM1 according to BS 7655
FillerPET (Polyethylene Terephthalate) fibres
Core-covering:Binding tape
Min. beding radius15 times cable radius (single core), 12 times cable radius (multi cores)




IEC60502-2,IEC 60228,IEC60332 ,BS 6622 , and ICEA S-66-524 ect.

Service Conditions And Parameters Of Cable:

PVC Insulated and Sheathed Power Cable are suitable to be laid for distribution line with A.C.50HZ and rated voltage up to 35kV. With the characteristics of stable capability, advanced technology, broad material resources, low price, good flexible and easy to lay and maintain.

The long-term permissible operation temperature of the conductor shall not be higher than 70ºC.

Conductor maximum short circuit((less than 5 second) temperature shall not be higher than 160ºC.

The cable is not limited by drop in level when being laid, and the environment temperature shall not be lower than 0ºC.

Perfect chemical stability, resistant against acids, alkalis, grease and organic solvents,and flame retardance.

Light weight, perfect bending properties, installed and maintained easily and


MV(10kv 11kv 15kv ) Power Cable

Model and Description Uo/U(Um)=3.6/6(7.2), 6/6(7.2), 6/10(12), 8.7/10(12), 8.7/15(17.5)kVNo.of CoreConductor cross-section area(mm2)
xlpe insulation1 core 3 core10 16 25 35 70 95 120 150 185 sq mm
Cu core

PVC sheathed power cable

steel tape armoured,PVC sheathed power cable

steel wire armoured ,PVC sheathed power cable

Al Core

PVC sheathed power cable

steel tape armoured,PVC sheathed power cable

steel wire armoured ,PVC sheathed power cable