sales@zmscable.com

Aluminium Conductor Power Cable ABC AAC ACSR

Aluminium conductor power cable overhead has been widely used in power transmission lines and electricity distribution lines with various voltage levels.

Overhead Line wires, whether bare conductors or insulated cables, provide an aerial route for the transmission and distribution of power.

ZMS Cables supplies a comprehensive range of aluminum overhead conductor line wires AAC, AAAC, ACSR, and aerial bundled cables (ABC) for the aerial power cable.


Applications of ABC, AAC, ACSR Aluminium Power Cable

ABC, AAC, AAAC, ACSR Overhead Cable, Cable Aluminium, is aluminum a conductor, Cable Low-Medium Voltage of ZMS Power Cable Company

Primarily used for overhead service drops applications, such as street lighting, outdoor lighting, and temporary construction service.

To be used at voltages of 600v phase-to-phase or less and at aluminum conductor temperatures not to exceed 75℃ for polyethylene(PE) insulated conductors or 90℃ cross-linked polyethylene(XLPE) insulated conductors.


  • Aerial Bundle Cable (ABC cable) is a very innovative concept for overhead power distribution as compared to the conventional bare conductor overhead distribution system. It provides a higher level of safety and reliability and lower power.

  • AAAC is used as a naked overhead conductor for transmission and distribution lines and a naked overhead conductor for transmission and distribution lines. AAAC is used for bare overhead wires of transmission and distribution lines, whose overhead lines require more excellent mechanical resistance, better corrosion resistance than AAC, and better corrosion resistance than ACSR. The Sag characteristics and strength-to-weight ratios of AAAC were superior to those of AAC/ACSR.

  • AAC conductor is also known as an aluminum stranded conductor. It is made of electrolytically refined aluminum with a purity of not less than and as low as 99.7%. Aluminum stranded wire is primarily used in urban areas where spacing is short and support points are close together. All aluminum conductors consist of one or more strands of aluminum wire, depending on the length of the wire, which determines its ultimate use. AAC is widely used in coastal areas because of its high corrosion resistance.


Losses and ultimate system economy by reducing installation, maintenance, and operative cost. The overhead line wires are designed for aerial power lines and room entrance wires with AC-rated voltage of 1kV and below.


Standards 

 GB/T12527,1179 ,IEC60502 ,NFC 33-209 ,BS 7870 ,ANSI/ICEA S-76-474 AS/NZS 3560.1 etc.

 *ZMS Cable can also design and produce for special application requirements.


Products Type of ZMS Power Cable

Cable NameDescriptionApplication
Covered line wire Service drop cable Secondary UD cablePVC-insulated aerial cablesForaerialpower transmission application
PE-insulated aerial cables

XLPE insulated aerial cables

Steel Reinforced Aluminium Wire with XLPE insulated aerial cableFor aerial power transmission application
For aerial power transmission applications, able to bear moderate pulling force.

Production Range

No. of cores of aluminum power cable: 1, 2, 3, 4, 5, 3+1, 4+1, 3+2

Nominal cross-section(mm2): 10~240

Construction

Phase conductors: Round stood or compacted 1350-H19 aluminum power cables or Copper conductor, AAAC, ACSR

Neutral or messenger conductor: Round stood or compacted 6201 aluminum alloy or AAC cable, ACSR

Street lighting conductor: Round stood or compacted Aluminium conductor

Insulation: LDPE, HDPE, XLPE, PVC (UV-resistant)

Power Cable

Power cables are used to transmit and distribute electrical energy. Power cables are commonly used in urban underground power grids, power station lead-out lines, power supply within industrial and mining enterprises, and over-the-river transmission lines.

There is no news related to this product.

CORPORATE SOCIAL RESPONSIBILITY

ZMS Cable have a wide product scope, includes: Power cables up to 500kV, AAC, AAAC, ACSR conductors, ABC Cable,electric wires, instrument cable, telecommunications cable, Stay wires. With advanced manufacture technology, rich human resource and effective management system, we guarantee all products are manufactured strictly in accordance with GB, IEC, BS, NFC, ASTM, DIN standards,etc. Beyond quality control, ZMS have been trying its best to offer much higher standard of services rather than expected.

The Adjuster
All customised cables designed by our cable engineer will be subject to testing to relevant standards and appropriate performance criteria. Bespoke cable testing will be conducted under our CNAS accreditation where appropriate. Where required by industry or application, we can submit for relevant cable certification and cable approval processes. For more information or to discuss possible custom designed cable solutions, please complete an enquiry form, contact our technical experts on the Technical Hotline +86 (0)371 6782 9333, or email:sales@zmscable.com

The Zms Cable Advantage

You can contact us in the following ways:

email to sales@zmscable.com OR click Inquiry

INQUIRY