Application:

Power cables for power networks, underground, and in cable ducting.

1. 6/10 kV Cu(AL)/XLPE /SWA(STA)/PVC Power Cable(3 CORE) AND 6/10 Cu(AL)/XLPE/AWA(ATA)(1 CORE )/PVC Power Cable

Cross linked XLPE insulation electric power cable not only has excellent electric and mechanical properties but also has powerful resistance against chemical corrosion, heat aging, and environmental stress.

2. Crosslinked 6/10kv XLPE insulated cable

Its structure is simple and can be used conveniently and also can be laid with no restriction of different levels.

The long-term operating temperature is 900C, and its transmission capacitance is large.

Our company can produce both flame retardant and non-flame retardant series of XLPE power cables our products can be produced according to our works specifications which are equivalent to GB12706, IEC60502, IEC60332, IEC60754, and some indexes are superior to standards such as stated above.

ZMS cable company mainly provides complete supply services for distributors and suppliers all over the world.

Consulting services, purchasing services, transportation services, and after-sales services are included.

AL/XLPE/STA/PVC Armoured Electrical Cable

Round bare aluminum conductor stranded according to IEC 60228

Inner semi-conductive layer

Core insulation XLPE

Color code according to HD 308 S2

Outer semi-conductive layer

Semi-conductive tape

Copper tape screen

Filler

PVC inner sheath

Galvanized steel tape armor (STA)

PVC outer sheath (red or black)

Standards:

IEC60502-2, IEC 60228, IEC60332, BS 6622, and ICEA S-66-524 ect.

Service Conditions And Parameters Of Cable:

PVC Insulated and Sheathed Power cables are suitable to be laid for distribution lines with A.C.50HZ and rated voltage up to 35kV.

With the characteristics of stable capability, advanced technology, broad material resources, low price, good flexibility, and ease to lay and maintenance.

The long-term permissible operating temperature of the conductor shall not be higher than 70ºC.

Conductor maximum short circuit(less than 5 seconds) temperature shall not be higher than 160ºC.

The cable is not limited by a drop in level when being laid, and the environment temperature shall not be lower than 0ºC.

Perfect chemical stability, resistance against acids, alkalis, grease, and organic solvents, and flame retardance.

Lightweight, perfect bending properties, installed and maintained easily.

Conveniently:

MV(10kv 11kv 15kv ) Power Cable
Model and Description Uo/U(Um)=3.6/6(7.2), 6/6(7.2), 6/10(12), 8.7/10(12), 8.7/15(17.5)kV	No.of Core	Conductor cross-section area(mm2)
XLPE Insulation	1 core 3 core	10 16 25 35 70 95 120 150 185 sq mm
Cu core
PVC sheathed power cable
Steel tape armoured, PVC sheathed power cable
The steel wire armoured, PVC sheathed power cable
Al Core
PVC sheathed power cable
Steel tape armoured, PVC sheathed power cable
The steel wire armoured, PVC sheathed power cable

Technical data:

Temperature Rating	Fixed: 0°C to +90°C
Conductor	Class 2 Stranded Copper or Aluminum Conductors for Single Core and three-Core Cables
Conductor Screen	Semi-conductive XLPE (Cross-Linked Polyethylene)
Metallic Screen	Individual or collective overall copper tape screen according to BS 6622
Insulation	XLPE (Cross-Linked Polyethylene)
Insulation Screen	Semi-conductive XLPE (Cross-Linked Polyethylene)
Minimum Bending Radius	Single core - Fixed: 15 x overall diameter 3 core - Fixed: 12 x overall diameter
Armour	Single core: AWA (Aluminium Wire Armoured) Multi-core: SWA (Steel Wire Armoured)
Sheath	PVC (Polyvinyl Chloride) Type TM1 according to BS 7655
Filler	PET (Polyethylene Terephthalate) fibres
Core-covering:	Binding tape
Min. beding radius	15 times cable radius (single core), 12 times cable radius (multi cores)

Power Cable

Power cables are used to transmit and distribute electrical energy. Power cables are commonly used in urban underground power grids, power station lead-out lines, power supply within industrial and mining enterprises, and over-the-river transmission lines.

There is no news related to this product.

CORPORATE SOCIAL RESPONSIBILITY

ZMS Cable have a wide product scope, includes: Power cables up to 500kV, AAC, AAAC, ACSR conductors, ABC Cable,electric wires, instrument cable, telecommunications cable, Stay wires. With advanced manufacture technology, rich human resource and effective management system, we guarantee all products are manufactured strictly in accordance with GB, IEC, BS, NFC, ASTM, DIN standards,etc. Beyond quality control, ZMS have been trying its best to offer much higher standard of services rather than expected.

The Adjuster: All customised cables designed by our cable engineer will be subject to testing to relevant standards and appropriate performance criteria. Bespoke cable testing will be conducted under our CNAS accreditation where appropriate. Where required by industry or application, we can submit for relevant cable certification and cable approval processes. For more information or to discuss possible custom designed cable solutions, please complete an enquiry form, contact our technical experts on the Technical Hotline +86 (0)371 6782 9333, or email:sales@zmscable.com; Case Studies