ZMS LSZH sheath cables also include PVC single-core AWA armored cables and XLPE multi-core SWA armored cables.
This design is commonly used for auxiliary power cables in power grids and various environments. The included armor means that the cable can be buried directly into the ground to prevent accidental shock and damage.
ZMS cables offer a comprehensive range of LSZH sheathed cables, typically used in fixed installations such as wiring in buildings.
It is also used in applications where fire and smoke emissions could pose a potential threat to human health or critical equipment.
LSZH cables are different from PVC cables and cables made of other compounds.
When a cable catches fire, it can produce large amounts of dense black smoke and toxic gases. However, because LSZH cable is made of a thermoplastic material, it produces only small amounts of smoke and toxic gases, and it contains no acidic gases.
It makes it easier for people to escape from a fire or hazardous area. Therefore, they are often installed indoors, such as in public areas, other hazardous areas, or poorly ventilated environments.
These XLPE insulated and LSZH sheathed power cables are generally used for fixed installation.
Suitable for building wiring, especially in areas where smoke and fume emissions may cause a potential threat to life but not for burial in the ground, either directly or in ducts.
ZMS Power Cable Group mainly provides complete supply services of LSZH sheathed power cables for distributors and suppliers all over the world.
Conductor: Copper Conductor
Core: Three / Four / Five Core
Cable Inner Sheath: PVC
Cable Tape: No-absorbent Material or OEM
Cable Outer Sheath: LSZH
Outer Semi-Conductor: Extruded semiconducting compound
Shield: Two copper tapes
Outer Sheath: PVC/HDPE
Conductor: Aluminum / Copper Conductor
Core: Single / Two / Three / Four core
Cable Inner Sheath: PVC
Concentric Conductor Layer: Copper / Aluminum
Cable Tape: Non-absorbent Material or OEM
Cable Outer Sheath: XLPE / PVC / PE
The solar cable is specially designed for the mutual cable of photovoltaic power generation. Its design has anti-ultraviolet and weather resistance. It is suitable for pipes and fixtures in the system, both internal and external, but not for direct burial.
Conductor: Class 5 flexible tinned copper conductor
Insulation: Halogen-free cross-linked compound(LSOH) / XLPE / Customized
Wire Sheath: Halogen-free cross-linked, flame retardant compound / PVC / Customized
Standard: Basic design to BS 8573:2012
|Flame Retardance (Single Vertical Wire Test)||BS EN 60332-1-2:2004|
|Reduced Fire Propagation (Vertically-mounted bundled wires; cable test)||BS EN 60332-3-24:2009 (cat. C)|
|Halogen Free||BS EN 50267-2-1|
|Minimum Smoke Emission||BS EN 61034-2|
|Spark Test||BS EN 62230|
Conductor: Annealed copper conductor, strand according to BS EN 60228 class 2.
Insulation: XLPE type GP8 according to BS 7655-1.3. HEPR type GP6 according to BS 7655-1.2 or crosslinked polyolefin n material type EI 5 according to BS EN 50363-5 can be offered as an option.
Inner Covering Option: The laid up cores may be covered by an optional extruded inner covering or separating tape. It shall be possible to separate the cores easily.
Cable Outer Sheath: Thermoplastic LSZH type LTS 4 according to BS 7655-6.1.
Outer Sheath option: UV resistance, hydrocarbon resistance, oil resistance, anti rodent, and anti termite properties can be offered as options.
Insulation Colour: Blue, brown black, and grey, Alternatively, green-and-yellow, brown, black, grey
Sheath Colour: Black, other colors can be offered upon request.
Maximum temperature range during operation (XLPE): 90°C Maximum short circuit temperature (5 Seconds): 250°C Minimum bending
Circular copper conductors(up to 25mm2): 4 x Overall Diameter
Circular copper conductors(above 25mm2): 6 x Overall Diameter
Shaped copper conductors: 8 x Overall Diameter
ZMS cable packaging is provided in the form of wooden reels, corrugated boxes, and coils.
The cable ends are sealed with BOPP self-adhesive tape and a non-hygroscopic sealing cap to protect the cable ends from moisture. We can print the required marks on the outside of the barrel with waterproof material according to customer requirements.
|Conductor||Nominal Insulation Thickness||Nominal Sheath Thickness|
|No.of Coresx Cross Section||Class of Conductor|
There is no news related to this product.
ZMS Cable have a wide product scope, includes: Power cables up to 500kV, AAC, AAAC, ACSR conductors, ABC Cable,electric wires, instrument cable, telecommunications cable, Stay wires. With advanced manufacture technology, rich human resource and effective management system, we guarantee all products are manufactured strictly in accordance with GB, IEC, BS, NFC, ASTM, DIN standards,etc. Beyond quality control, ZMS have been trying its best to offer much higher standard of services rather than expected.
You can contact us in the following ways:
email to email@example.com OR click Inquiry