LAN Cable Networking Cat7

CONDUCTOR

* Raw material of the conductor: solid bare copper

* Conductor Dia.: 0.585±0.003mm (23AWG)

INSULATION

* Raw material of the conductor: F-PE

* Quantity:4 twisted pairs

Blue/white-blue; Green/white-green;

Orange/white-green;Brown/white-brown;

* Insulation Dia. : 1.45±0.005mm

* Average thickness: 0.4325 mm

Minimum point thickness: 0.43mm

3) TWISTED PAIRS SCREEN: Aluminum Foil

OVERALL SCREEN

* Raw material of the screen: 96/0.10mm TC wire braiding

* Coverage rate:≥40%

JACKET RIP CORD:Nylon thread

6) SHEATH

* Sheath material: LSZH or PVC

* Nominal Dia.: 7.5 ± 0.2mm

* Average thickness: 0.65mm

* Minimum point thickness: 0.55mm

Production Description of ZMS LAN Cable

1. This kind of ZMS cable electric use bare copper to be the center conduction with the specification is 23AWG and PE to be the dielectric.

The jacket is made of fireproof material, which is so meanful to the Cat.7 communication;

2. This Cat.7 S/FTP cable is conform to the SIO/IEC, TIA/EIA and EN standards and the electrical characteristics are exceed the

lastest Cat.7 standards;

3. LSZH Cable: means “Low smoke zero halogen”, which is the symbol of environmental protection;

Electrical Characteristics

1. Impedance: 100±15;

2. Static electric capacity: max:17.1nf/kf;

3. Resisitance: max:28.6/kf;

4. Unbalance resisitance: max 5%;

5. Unbalance capacity: max 330pF/100m;

6. Roted communicate rate: 65%

Physical Characteristics

1. Copper diameter: 23AWG

2. Outer diameter: 7.9+/- 0.5mm

3. Weight: 10.5kg/kft

4. Minimum bend radius: O.D.*4-8

5. Maximum pulling tension: 10.0

6. Jacket material: PVC/LSZH

7. Roted temperature: -20~60°C

Application of Lan Cable:

VoIP

ISDN

Token

100M TP-PDM

Analog and Data Video

TR-16 Active and Passive

155M/622M/1.2GATM

IEEE 802.3: 10Base-T; 100Base-T; 1000Base-T; 10GBase-T

Description:

Rated temperature:60°C,75°C,90°C

Reference standard:UL444,UL1581

Solid bare copper conductor

PVC/LSZH jacket, RoHS/REACH compliant

Comply to TIA/EIA-568-C.2-10,IEC61156-5,

EN50173&IEC11801

Operating temperature:-30~+50°C

Minimum bending radius: 8D