+86 371-67829-333

0.6/1kV Armored Instrument Cable

Paired or Triplex Instrument Cable,Screening control cable,XLPE insulation, Armored Control Cable,Instrument Cable
0.6/1kV Armored Instrument Cable


This kind of Instrument cable is suitable for instruments and other electrical equipment in the signal transmission and control circuit.The armoured Instrument Cable are generally use for outdoor installation and suitable for wet and damp areas.  


IEC 60502, BS 5308, GB 9330


Conductor: copper;


Screen:copper (plastic) /aluminum(plastic) tape

Armoured:Galvanized steel wire

Sheath:PVC sheathnstrument cable 1x 2x 1 mm2

Technical Specifications

ConductorAnnealed or tinned copper, sizes: 0.5mm² and 0.75mm² mulitistranded(Class 5),
0.5 mm², 1.0 mm² solid(Class 1), 1.5mm² or 2.5mm², multistranded(Class 2) to?BS6360
InsulationPE (Polyethylene) type 03 to BS6234
PairingTwo or three insulated conductors uniformly twisted together with a lay not exceeding?100mm
Colour codeSee technical information
Binder tapePETP transparent tape
Collective?screenAluminium/polyester tape is applied over the laid up pairs metallic side down in?contact with tinned copper drain wire, 0.5mm²
Outer sheathPVC Sheath, type TM 1 or type 6 to BS 6746
Sheath colourBlack or blue